英文合同模板汇编（精选18篇）

　　(1)公差：数量及总值均有_____%的增减,由卖方决定

　　Tolerance: With _____% more or less both in amount and quantity allowed at the

　　sellers option.

　　(2) 原产地

　　Country of Origin:

　　(3) 付款方式：30%预付，70%发货前一周付清.

　　Payment terms: 30% deposit, 70% payment within one week before delivery.

　　(4) 交货时间：收到预付款后15天内完成装运。

　　Time of shipment: Within15 days after deposit received.

　　(5) 贸易方式：FOB Shanghai

　　Terms of Shipment: FOB Shanghai

　　(6) 包装：胶合板木盘外封铁皮

　　Packing： Plywood drum with steel sheet cover.

　　(7) 保险：由卖方按发票全额110%投保至_____为止的_____险。

　　Insurance： To be effected by seller for 110% of full invoice value covering _____ up to _____ only.

　　(8) 装运口岸：中国上海港

　　Port of Loading: Shanghai Port, China

　　(9) 转运：允许

　　Transshipment: Allowed

　　(10 分批装运：允许分批装运

　　Partial Shipment: Allowed

　　(11) 目的口岸：

　　Port of Destination:

　　(12) 唛头：Shipping Marks：

　　(13) 单据：Documents：

　　(14) 品质与数量、重量的异义与索赔：Quality/Quantity Discrepancy and Claim：

　　(15) 逾期发运：如果由于买方原因造成逾期发运，买方承担责任。造成自签订合同之日起超过45天不能发运的，卖方将每日按货物金额的3%收取保管费；如果由于买方原因造成逾期发运超过6个月，卖方有权自行处置定金和货物。如果是卖方原因造成的逾期发运，卖方需提前告知买方并得到买方的确认并承担其他相关费用。

　　LAST SHIPMENT: if the late delivery is caused by the buyer, the buyer shall bear the

　　responsibility. If the delay has being made more than 45 days from the signing of the Sales Contract hereof, the buyer shall pay 3% of total amount each day, and if the delay is more than 6 months, the Seller has the right to dispose the down payment and the goods. If the late delivery is caused by the Seller, the Seller shall inform the Buyer in advance and get confirmation from the Buyer, and the related expense shall be born by the Seller.

　　(16) 质量/数量异议：对于质量方面的异议，买方必须在货物抵达目的港后30天之类提出：对于数量方面的异议，买方必须在货物抵达目的港后15天之内提出。对由于保险公司、运输公司、其他运输机构或邮局的原因所造成的货物差异，卖方不负任何责任。 QUALITY/QUANTITY DISCREPANCY: In case of quality discrepancy, claim shall be filed by the Buyer within 30 days after the arrival of the goods at port of destination; while for quantity discrepancy, claim shall be filed by the buyer within 15 days after the arrival of the goods at port of destination. It is understood that the Seller shall not be liable, for any discrepancy of goods shipped due to causes for which the Insurance Company, Shipping Company, other transportation organization or Post Office are liable.

　　(17) 不可抗力：卖方对由于下列原因而导致不能或暂时不能履行全部或部分合同义务的，不负责任：水灾、火灾、地震、干旱、战争或其他任何在签约时卖方不能预料、无法控制且不能避免和克服的事件。但卖方因尽快地将所发生的事件通知对方，并应在事件发生后15天内将有关机构出具的不可抗力事件的证明寄交对方。如果不可抗力事件之影响超过120天，双方应协商合同继续履行或终止履行的事宜。

　　FORCE MAJEURE: Seller shall not be responsible for failure or delay in performance of entire or portion of these Sale Contract obligations in consequence of Force Majeure incidents: flood, fire, earthquake, drought, war, or any other matters couldn’t be foreseen or controlled or couldn’t be avoided. But Seller shall inform the incidents to Buyer immediately, and shall delivery the certificate of Force Majeure incidents issued by related organization within 15 days after the incidents happened. If the incidents influence more than 120 days, both parties shall negotiate to decide whether to execute or terminate the Sales Contract.

　　(18) 仲裁：因履行本合同所发生的一切争议，双方应友好协商解决，如协商仍不能解决争议，则应将争议提交中国国际经济贸易仲裁委员会（北京），依据其仲裁规则仲裁。仲裁裁决是终局的，对双方都有约束力。仲裁费应由败诉一方承担，但仲裁委员会另有裁定的除外。在仲裁期间，除仲裁部分之外的其他合同条款应继续执行。

　　ARBITRATION: All disputes across from the execution of, or in connection with this Sales Contract shall be settled friendly through negotiation, in case no settlement can be reached, the case shall then be submitted to China International Economic and

　　Trade Arbitration Commission, Beijing for arbitration in accordance with its provisional rules of procedure. The result of arbitration shall be born by the losing party except for the condition the Commission has other judgment. During the arbitration period, clauses beside of the arbitrated parts shall be executed.

　　(19) 本合同为中英文对应，一式两份，买卖双方各执一份；合同自卖方签字盖章、买方签字后生效（传真件以及扫描具有正版相等法律效应）。

　　The Sales Contract is concluded in Chinese and English with same effectiveness, and will come into effect on stamp of Seller and signing by Buyer. The Sales Contract is in dual original and each party shall have one original copy of this Sales Contract. (Any scanned and faxed copy shall have the same legal effect as the original one.)

　　(20) 备注：

　　Remark：

　　买方确认签署： 卖方确认签署：

　　For and on behalf of Buyer: For and on behalf of Seller:

英文合同模板汇编 篇18

　　为保护双方的商业秘密，本着公平合理、平等互利的原则，双方经友好协商达成如下保密协议：

　　To protect commercial secretes of Party A and Party B hereof，following the principle of fairness, equity and mutual benefit, the two parties involved hereby reach this non-disclosure agreement:

　　1、甲方提供给乙方的任何资料均属于甲方的商业秘密，乙方负有保密义务。乙方负有保密义务的甲方商业秘密的范围包括但不仅限于如下陈述对象：

　　All the information provided by Party A to Party B are in the scope of commercial secrets, and Party B has the obligation to keep them confidential. The scope of commercial secrets of Party A that Party B has the obligations to keep confidential includes but is not limited to the followings:

　　1.1模具合同（包含品种，规格，数量、价格因素，交期等信息）、模具检验标准及产品检验标准；

　　mold contract (including variety, specification, quantity and price factor, delivery date, etc.), mold inspection standard and product inspection standard;

　　1.2与产品零件有关的任何资料、参数、图纸、夹具、工装等；

　　All information, parameters, drawings, fixtures and tools concerning parts of the product;

　　1.3涉及甲方产品的外观、功能等方面的模型、样机；

　　models and samples of products concerning appearance and function of Party A;

　　1.4任何标明具有“OPPO”或者等效标识的产品，包括IC卡，LCD显示屏，包装材料如彩盒、说明书、手提袋、广告制品、外壳等；

　　Any product marked with “OPPO” or equivalent signs including IC card, LCD display, packing material such as color dispenser, product manual, handbag, advertising product and casing;

　　1.5甲方提供的模具技术、模具专利、产品专利、开发的系统流程；

　　mold technology, mold patent, product patent and system flow of development provided by Party A;

　　1.6在乙方正在生产的甲方的模具状况、生产机型、订单明细（包括颜色、数量、交期等）等细节；

　　Information of mold produced by Party B, product model, detailed information of purchase order (including color, quantity and date of delivery) of Party A, etc.;

　　1.7甲方未上市机型的外形、造型、配色、试模样品（包括试模的素材、涂装样品）等原始技术资料、实物；

　　Original technical data and actual product of Party A concerning appearance, industrial design, color matching, trial product of mold (including elements of trial mold and sample of coating) of the model that have not entered market yet;

　　1.8其他甲方拥有知识产权结构设计方案及带有甲方专属LOGO的资料、实物。

　　Other structure design schemes to which Party A owns intellectual property rights, and information and actual product with exclusive LOGO of Party A;

　　2、对甲方上述商业秘密，乙方承担以下保密义务：

　　Party B has the following obligations to keep the abovementioned commercial secretes of Party A confidential:

　　2.1主动采取加密措施对上述所列及之商业秘密进行保护，防止任何第三者知悉及使用；

　　Take active measures to protect the abovementioned commercial secretes in case they are learnt or used by a third party;

　　2.2保证接触甲方商业秘密的员工不泄露知悉的甲方商业秘密，保证非接触甲方商业秘密的员工不得刺探 或者以其他不正当手段（包括利用计算机进行检索、浏览、复制等）获取甲方的商业秘密；