英文合同模板汇编（精选18篇）

　　1.5 如应需方的要求必须更改订单所记载的订单内容，应由双方协商后，形成书面文件。

　　Any changes to the content of the purchase order as requested by the Demander shall be agreed upon by both parties and developed into a written document.

　　2、 包装：Packaging:

　　2.1 除非另有规定，包装物应由供方提供并自负费用，包装物上的装运标志必须符合需方要求。

　　Unleotherwise specified, the Supplier shall provide and pay for the packaging materials, and the packing logo on the package shall be compliant with the requirement of the Demander.

　　2.2 供方应保证所提供的包装物符合运输、产品安全的要求;供方应采用合适的安全措施，妥善包装货物，达到防潮、防湿、防震、防尘等要求;双方对包装方式另有约定的，应遵守双方约定;因包装不符合规定造成产品损坏、灭失或其他损失的责任由供方承担。

　　The Supplier shall ensure the packaging materials provided comply with the requirement for transport and safety of the products, and shall take all appropriate precautious measures against damp, humidity, vibration and dust. The products shall be packed by the means agreed upon by both parties. The Supplier shall be liable for any damages, losses from the products or any other losses arising from non-compliance with packaging specification.

　　六、收货及检验： Acceptance and Inspection:

　　1、 双方应按照约定交货方式进行交货;需方应于供方产品送达约定地点后清点合同产品，核对产品数量、名称、包装等，并办理收货确认手续。

　　The products shall be delivered to the Demander by the means agreed upon by both parties. The demander shall check for the quantity, name and package of the products as specified on the purchase order for takeover confirmation at the delivery destination agreed upon by both parties.

　　2、 产品验收按照双方确认的样品、图纸、《检验标准书》、《检验规格书》进行。未约定的验收内容有国家或行业标准的，应符合相关标准;无标准的以满足需方实际需求为准。

　　The products shall be accepted in accordance with such acceptance criteria as product sample, the diagram, Inspection Criteria, Inspection Specification agreed upon by both parties, or in accordance with national standard or industry standard if no acceptance criteria is provided, or in accordance with the actual need of the Demander if no standard is available

　　3、 产品验收合格不表示产品质量合格，

　　合同范本

　　《购销合同英文范本》。若供方产品在需方生产或消费使用过程中，因产品出现严重质量问题或存在缺陷而造成需方的直接及间接损失均由供方承担。

　　The accepted products do not mean quality passed. The Supplier shall be liable for any direct and indirect losustained by the Demander arising from serious quality problems or defects of the products found in the course of using or consuming the products supplied by the Supplier.

　　七、品质保证： Quality Assurance:

　　1、 除非另有约定，供方交付的产品应符合：①本合同“陈述和保证”及本条款等规定的内容;②经双方确认的产品技术规格，检验标准以及双方不时签发和确认生效的相关修订书，工程、计划、规格变更通知等文件总规定的标准;③生效订单中规定的标准，以及封样样品表示的标准。上述标准之间如有冲突，则按照最新确认的标准执行，无法确定标准确认时间的，按照较高标准执行。

　　Unleotherwise specified, the products delivered by the Supplier shall be in compliance with:①‘Representation and Warranty’ and the terms and conditions under this contract; ② product technical specification, inspection standard and their relevant revisions, and the criteria contained in notice of project, schedule and specification modification issued and confirmed by both parties from time to time; ③ criteria as specified on the effective order and as shown in the product sample. Should there be any conflicts among the criteria mentioned above, the criteria last confirmed, or the higher standard shall be executed if the time for the criteria confirmation fails to be identified.

　　2、 根据需方QA部的要求，供方应当配合《品质保证协议》的签署工作，进行积极协调并达成双方都能接受的共识，促成双方成功签署《品质保证协议》;双方都有认真履行《品质保证协议》的义务。

　　The Supplier shall proactively cooperate with the Demander’s QA department to facilitate the signature of Quality Assurance Agreement and the generation of consensus acceptable to both parties. Both parties are liable for earnestly executing the Quality Assurance Agreement.

　　3、 双方将来可对上述内容规定做更明确的补充规定，但该补充规定的标准高于上述规定的或有更具体的标准的，按补充规定执行;低于上述规定的标准的，按上述规定的标准执行。

　　Both parties may enter into more specific regulations supplemented to the regulations above. The supplement shall be executed if the criteria contained are higher than those of foregoing, or more specific criteria are provided. But the regulations above shall be executed if the criteria contained in the supplement are lower than those of the foregoing.

　　八、陈述和保证：Representation and Warranty:

　　1、 供方对其提供的产品享有合法的所有权，同时没有索赔、扣押、抵押或其他行为存在或威胁到供方，以致妨碍到需方对产品使用和销售。

　　The Supplier is entitled to the ownership of the products provided and there is no existence of any claim, impoundment, mortgage or any other threatened actions against the Supplier, which may lead to prevent the Demander from using and selling the products.

　　2、 对本合同的执行不会违反与其相关的任何合同条款、责任、法律、法规和法令，产品符合产品生产、储存、销售的强制性法律、法规规定的标准。

　　The execution of this contract shall not violate any related terms, responsibility, laws, regulations and decrees, and any applicable mandatory laws, regulations concerning product manufacture, storage and sale.

　　3、 产品是原厂新的且不包含任何用过的或修过的部件，并正常进口。

　　The products shall be newly-manufactured from the original manufacturer exclusive of any used or repaired components, and shall be imported through normal procedure

　　4、 供方产品及其产品支持文件不侵犯任何第三方的知识产权，需方不会因使用、销售产品或产品的任何部分侵害任何第三方的知识产权。

　　The product and its supporting documents provided by the Supplier shall not infringe the intellectual property rights of any third party. Under no circumstance should the Demander be liable for infringement of intellectual property rights of any third party by using, selling the products in whole or in parts.

　　5、 遵守本合同“价格条款”的有关规定，不进行欺诈性报价。

　　The Pricing Terms under this contract shall be abided by and no fraudulent price quotation is allowed.

　　6、 由需方提供给供方用于为需方进行产品制作的物料，仅限于为需方进行生产;供方需提供固定的、安全的仓库进行储存，在其使用前，供方应对该物料的性能、数量、品质等负责，如必要，需承担相关保险的费用。

　　The manufacturing materials provided from the Demander to the Supplier shall be only used for manufacturing the products. The Supplier shall provide a robust and safe warehouse to store such materials and shall be responsible for the performance, quantity and quality of such materials before the usage, and shall be liable for any cost in association with the insurance if necessary.

　　7、 关于货品制造上必须使用的模具;

　　The mold which has to be used for the product manufacturing:

　　双方需制定模具采购/保养合同，该合同中应包含关于模具价格、付款、所有权、保管、保密、技术协议等内容，双方均需按照此模具采购合同执行。

　　Mold Procurement and Maintenance Agreement, which contains such content as price, payment, ownership, storage, confidentiality and technology agreements shall be entered into and executed by both parties.

　　8、 知识产权：Intellectual Property Rights:

　　8.1 使用许可：除非另有约定，供方向需方提供的本合同涉及的产品并不视为该产品所含有的供方拥有或控制的任何知识产权的转让;但对于需方在加工、组装、使用或销售产品时必须拥有知识产权许可的产品，供方依据本合同有权并已经向需方授予了该知识产权的符合本合同目的的使用许可。

　　Usage License: the provision of the products from the Supplier to the Demander under this contract is not deemed to transfer any intellectual property rights contained in the products which is owned or controlled by the Supplier, unleotherwise agreed upon. The Supplier reserve the right to grant and has granted the Demander the Usage License for processing, assembling, using or selling the products which are intellectual property rights license required, in line with the objective of this contract.

　　8.2 需方提供的部件：如果需方提供部件供供方使用以履行本合同，则供方只能将需方提供的部件用于此目的。